Evikon E2630-CO is a detector designed for precise monitoring of carbon monoxide (CO) concentration in the air. The device is equipped with an electrochemical sensor that ensures reliable detection and stable measurement even at low concentrations. This makes it ideal for applications where it is necessary to monitor the safety limits of this hazardous gas.

The device is housed in a wall-mounted enclosure with IP65 protection, ensuring resistance to dust and water. In addition, it features a visual and audible alarm for early warning when carbon monoxide concentration rises. The E2630-CO is equipped with two SPDT relay outputs, allowing easy integration with ventilation and alarm systems.

Typical applications:

The E2630-CO detector is intended for monitoring carbon monoxide in environments such as boiler rooms, garages, tunnels, industrial halls and other enclosed spaces where CO may accumulate. The device helps prevent health risks associated with exposure to this gas and contributes to the safety of both personnel and operations.

Carbon Monoxide CO:

Carbon monoxide (CO) is colourless and odourless, which makes it particularly dangerous because its presence cannot easily be detected without a detector. It is produced by the incomplete combustion of fossil fuels, for example in boilers, cars or during burning in enclosed spaces. Even low concentrations of carbon monoxide can cause health problems such as headaches, dizziness or poisoning, while higher levels can be fatal.

Calibration certificate

Every package of Evikon gas detectors includes a factory-issued calibration certificate. The calibration certificate is in English. Gas concentration measurement is affected by operating temperature and humidity, therefore the detector is calibrated during production with enhanced safety in mind.

Key features:

• Detected substances: Carbon Monoxide CO
• Sensor type: Electrochemical sensor with diffusion sampling.
• Measurement range: 0...200 ppm with 1 ppm resolution.
• Two-stage detection
• Response time: Less than 120 seconds with signal update every second.
• Alarms: Flashing LED and siren (85 dB).
• Recommended recalibration interval: 6-12 months
• Expected sensor lifetime: > 5 years
• Avoid strong mechanical shocks, vibrations or electromagnetic interference (EMI). Also avoid exposure to corrosive gases or products containing silicone.

Specifications:

• Power supply: 24 VDC/AC ±20%
• Power consumption: < 2 VA
• Max. load of SPDT relay outputs: 250 VAC / 30 VDC, 5 A max
• Operating conditions: -40...+70 °C, <95% RH, pressure 0.9...1.1 atm
• Enclosure dimensions: H140 × W145 × D55 mm
• Protection class: IP65

This detector is suitable for monitoring carbon monoxide in various environments, including industrial facilities and storage areas. It offers stable performance with low maintenance requirements, making it a practical solution for long-term use across a wide range of applications.