Questions? +32 460 226 991 (English). EU-wide delivery!

Gas detector for carbon monoxide with LCD display EVIKON E2638-CO2-40K-R-LCD

Gas detector for carbon monoxide with LCD display EVIKON E2638-CO2-40K-R-LCD

EVIKON
  • Product code: E2638-CO2-40K-R-LCD-
  • Manufacturer code: E2638-CO2-40K-R-LCD-230
  • Warranty: 2 years

Gas detector for carbon dioxide EVIKON E2638-CO2-40K-R-LCD, alarm signal: visual (flashing display), LCD display with current measured value, power supply: 90...265 VAC, measuring range: 0-40,000 ppm CO2. - no audible alarm More information

  • Delivery

    Delivery to Belgium (days are avarages)

    FedEx:
    2.7 workdays € 0,00
    Bpost HD (Home Delivery):
    4.4 workdays € 0,00
    BPost - PP (Pick-up Point):
    3.9 workdays € 0,00
    FedEx Priority:
    1.7 workdays € 12,71
    DHL Express:
    1.2 workdays € 16,94

    DHL Express: 1.2 workdays, € 16,94

  • In stock 2 pcs  
     
Price excluding VAT € 676,00
Price with VAT 21 % € 817,96
+

Parameters and catalogs

Detector type Stationary
Output signal ModBus RS485, 2x Switching Relay, 2x Analog Output 4-20mA/0-10V
Power Supply 230 VAC
Type of gas CO2 - Carbon dioxide
Weight 0.50 kg

A gas concentration sensor (gas detector) is used to detect and provide early warning of a dangerous (explosive or toxic) concentration of the monitored gas. The sensor is suitable for use in underground car parks, boiler rooms, kitchens and other enclosed spaces where dangerous amounts of gas may accumulate. The detector is equipped with two-stage signalling – visual (LCD display) and audible (85 dB). It also features two output relays (volt-free) with switching contacts, which can be used for remote signalling or for controlling ventilation / a solenoid valve, etc. The sensor is built on the unified PluraSens platform. In addition to switching relays, the platform also enables the detector to be connected via two analogue outputs 0–10 V / 4–20 mA and a ModBus RS485 digital interface.  
Manufactured in a robust design with IP65 protection - ABS plastic, resistant to mechanical damage. Rigid, tough, resistant to both low and high temperatures, low absorbency, and harmless to health.

Carbon dioxide is heavier lighter than air. The detector should be installed just above the floor, away from corners, recesses or holes. The recommended coverage area for one detector is 500...1000 m2, which corresponds to a radius of approx. 12...18 m.

Each sensor is factory-calibrated to default values. The law stipulates that recalibration must be carried out at least once every 12 months. Calibration may only be carried out by a person certified by the manufacturer.

For more information about calibration - www.kalibrovat. cz 

The sensor is intended for the detection of flammable gases:
Carbon dioxide (CO2)

DETECTOR CALIBRATED FOR CARBON DIOXIDE.

Features:

  • Selective, sensitive and stable detection of flammable gases
  • Long sensor service life
  • Wall mounting, IP65 protection
  • Visual and audible alarm
  • LCD display
  • Two output relays for alarm / ventilation control
  • ModBus RS485 digital communication
  • Two analogue output signals 0-10V/4-20mA

Tip: Get automatic reminders of the statutory calibration date via the www.kalibrovat.cz service

Tip: The detector can be fitted with a remote wired sensor.

We respond to your product queries as quickly as possible, usually within 24 hours.

Nenašli jste to, co jste chtěli vědět?