The filter is made from high-quality thermoplastic resistant to mechanical damage and impact. The rubber parts are made from elastomer. The metal components of the filter are made from red bronze alloy or stainless steel.

When installing, the filter should always maintain a vertical position. DRUFI filters use the SYR flange system, so they do not have any connecting size themselves. They can be mounted on additional SYR flanges DN 32-50.

Maintenance is recommended at least every six months using backwashing. Backwashing is also recommended if there is a reduction in flow due to increased pressure loss. Backwashing is initiated semi-automatically by opening and closing the ball valve. You can set the month for the next backwash on the filter. Full automation of backwashing can be achieved by purchasing the RSA flushing automation.

Features

• inlet pressure 2...16 bar
• certified DVGW, KTW
• timer for the next backwash
• mesh fineness 90 μm
• water temperature max. 30 °C
• drinking water
• flow rate DN 32 - 8.4 m3/h at a pressure loss of 0.2 bar
• flow rate DN 40 - 9 m3/h at a pressure loss of 0.2 bar
• flow rate DN 50 - 9.2 m3/h at a pressure loss of 0.2 bar
• flow rate DN 32 - 13 m3/h at a pressure loss of 0.5 bar
• flow rate DN 40 - 14.5 m3/h at a pressure loss of 0.5 bar
• flow rate DN 50 - 15 m3/h at a pressure loss of 0.5 bar