Questions? +32 460 226 991 (English). EU-wide delivery!

Smart Gas Detector for Nitrous Oxide EVIKON E2639-N2O-230

  • 2 variant

Smart Gas Detector for Nitrous Oxide EVIKON E2639-N2O-230

EVIKON
  • Product code: E2639-N2O-230
  • Manufacturer code: E2639-N2O-230
  • Warranty: 2 years

Smart nitrous oxide (N2O) detector EVIKON E2639 with a range of 0...1000 ppm. Durable IP65-rated enclosure, 3 relays, RS485 Modbus communication and built-in LED/audible alarm. More information

  • Availability

    Out of stock - can be requested

  • Out of stock  
Price excluding VAT € 1 091,00
Price with VAT 21 % € 1 320,11

Product variants

+

Parameters and catalogs

Detector type Stationary
Equipment Siren 85dB, LED
IP Rating IP 65
Output signal ModBus RS485, 3x SPDT relay, 2x Analogue output 4-20mA
Power Supply 230 VAC
Type of gas N2O-Nitrous oxide
Weight 0.50 kg

E2639-N2O is a detector designed for monitoring high concentrations of nitrous oxide in the air. The device is equipped with a temperature-compensated sensor that ensures reliable detection and stable measurement, and it is housed in a wall-mounted enclosure with IP65 protection. The E2639 features three SPDT relays with a maximum load of 250 VAC 5 A. Two relays are used for so-called two-stage detection. The third relay indicates a sensor fault. Communication with higher-level systems is provided via the RS485 Modbus RTU digital interface, supplemented by two 4–20 mA analogue outputs. In addition, the device includes four LEDs and an audible alarm to immediately alert operators when the set limit is exceeded directly at the installation site – without the need to monitor a remote control system. 

Typical applications

The E2639-N₂O detector is intended for monitoring nitrous oxide in environments such as healthcare facilities, dental surgeries, operating theatres, chemical laboratories, food processing plants, and other enclosed spaces where N₂O may accumulate. The device helps prevent health risks associated with exposure to this gas and contributes to ensuring the safety of both personnel and operations.

3D model of the N2O molecule

Nitrous oxide (N₂O)

Nitrous oxide is a colourless gas with a faintly sweet odour, the presence of which in air cannot be reliably detected by the senses at normal concentrations. In enclosed spaces, it can accumulate to dangerous concentrations and, at higher levels, has a narcotic effect on the central nervous system. Exposure to higher concentrations of nitrous oxide may cause dizziness, nausea, disorientation, or loss of consciousness, and prolonged exposure may lead to damage to the nervous system, impaired blood formation due to inhibition of vitamin B₁₂, and adverse effects on reproductive health.

Smart communication – ideal for fire alarm systems

The E2639 detector combines the advantages of an autonomous safety device and an intelligent communication node. It is designed for seamless integration with fire alarm systems (FAS) and offers a wide range of outputs for comprehensive control:

  • Autonomy: 3× volt-free SPDT relays for direct control of equipment or safe system shutdown.
  • Connectivity: Dual RS485 Modbus RTU interface for real-time digital export of measured data to a higher-level system (BMS).
  • Control: 2× 4–20 mA analogue outputs intended for precise control of the ventilation frequency inverter.
E2639 detector
Easy installation

Easy installation

The E2639 is equipped with three M20 cable glands and a dual terminal block for Modbus RTU. The duplicated Modbus RTU terminals help simplify and speed up bus wiring for connection to a higher-level system. No more inserting two conductors into one terminal. Thanks to the M20 cable glands, all required outputs can be connected conveniently.

Factory settings:

  • Measuring range: 0...1000 ppm
  • ALARM1 (RE1): 250 ppm
  • ALARM2 (RE2): 500 ppm
  • ALARM3 (RE3): sensor fault
    • Automatic alarm reset after ventilation
  • Analogue outputs: 4-20mA = 0...1000 ppm
  • Modbus RTU address: Baud rate 9600, Parity None, Stop bits 1, Slave ID 1

Key features

  • Sensor type: Dual-beam infrared (NDIR) sensor
  • Measuring range: 0...1000 ppm
  • Resolution: 1 ppm
  • T90 response time: approx. 30 s
  • Recommended recalibration interval: 6-12 months
  • Estimated sensor lifetime: > 5 years
  • 1-year warranty on the sensor itself (2 years on the complete device excluding the sensor)

Calibration certificate

Each detector package includes the original manufacturer's calibration certificate in English, confirming the accuracy and correctness of measurement at the time of leaving the factory.

We respond to your product queries as quickly as possible, usually within 24 hours.

Nenašli jste to, co jste chtěli vědět?