The submersible sewage pump with float Wilo TMW 32/8 is an indispensable assistant for pumping water in domestic conditions. The pump is ready for fully automated operation. It is lightweight and easy to transport, suitable for both fixed and mobile installation. For water drainage, a pressure hose or pipe can be used (especially for permanent placement).

The motor is cooled by the surrounding medium, transferring its residual heat to the surroundings through its casing. In case of overheating, the pump switches off and restarts once it has cooled down. The hydraulics are separated from the motor by a sealing chamber filled with white oil. On the motor side, there is a shaft sealing ring, and on the hydraulic side, a mechanical seal.

The wastewater pump with an integrated vortex head (Twister function), open multi-channel impeller, and vertical screw connection.

Use of the pump

Pumping clean or slightly polluted water:

• from tanks, shafts, and excavations
• during flooding and inundation
• from sumps
• for drainage of basement areas
• water without faeces and long-fibre components

Features and equipment of the pump

• float switch (factory mounted)
• 10 m connection cable incl. "Schuko" plug
• cooling by pump casing circulation
• IP68
• thermal motor control
• temperature of the pumped medium is +3...+35 °C (short-term up to 3 minutes, medium can be pumped up to a temperature of 90 °C)
• max. immersion depth 3 m
• discharge nozzle Rp 1 1/4 (internal thread DN32).

Contents of delivery

• pump
• cable with plug
• installed float switch
• threaded connection with non-return valve
• hose connection
• installation and operating instructions