The sensor is designed for measuring air temperature and humidity in air conditioning ducts, interiors, and exteriors without heightened aesthetic design requirements. Outputs can be voltage or current, fully configurable within the range of 0-10V or 0-20mA. The device can be configured by connecting to a PC using a standard USB mini B cable and the freeware application USB_SET.

Main Features:

• Supply voltage: 15-30 VDC
• Maximum consumption: 55mA (with loaded outputs)
• Resolution: 0.1°C for temperature, 0.1% RH for humidity
• Maximum measurement error: ±0.5°C (20-40°C), ±3% RH (25°C)
• Calibration interval: recommended every 2 years

Technical Specifications:

• Operating temperature range of the sensing part: max. 80°C, max. 100% RH without condensation
• Operating temperature range of the electronics: -30 to 60 °C
• Protection: enclosure IP65, sensor IP40
• Terminal type: COB, wires max. 1.5 mm²
• Gland: PG9, max. cable Ø 8 mm

Installation and Maintenance:

• The sensor is equipped with a plastic central holder for mounting on the wall of the air duct.
• Regularly clean the dust filters located in the removable plastic end cap of the sensor.
• Configuration and upgrade via the USB_SET program, available for free on the manufacturer's website.