The three-way diverter valve ESBE VRG 232 is made from DZR brass with protection against zinc leaching. The valve is suitable for applications where precise control characteristics are not required. It is also equipped with an adjustable handwheel with a scale, which is additionally fitted with end stops. The valve's action radius is a maximum of 90°. The scale located under the adjustment knob can be positioned anywhere along the rotation path of the mixing valve's core, depending on the valve's orientation in the application.

The valve's nominal diameter is DN 50, but the connection thread is sized at 2 1/4".

Examples of Use

• Heating applications
• Cooling
• Solar systems
• Ventilation
• Central distribution systems

The VRG 232 valve can be used as a diverter or as a mixing valve.

Installation Example

Suitable Actuators

• The complete range of ESBE actuators from the ARA 600 series (adapter included with the actuator).
• ESBE actuators from the 90 series (including 90C controllers, etc.). Must be fitted with the VRG 801 adapter - order number 16053300.
• HVAC actuators BELIMO - any servo (e.g., LM-A, NM-A, LF, etc.) can be used in conjunction with the MK-VRG type adapter....
• Actuators for mixing fittings BELIMO NRD, HT in conjunction with adapter MS-NRE6. 

Service

All main parts can be replaced or resealed - a gasket set or complete renovation kit is available. In most cases, it is not necessary to remove the valve from the application during servicing.