Most searched for brands of measuring and regulation technology
The weld-on tailpiece from Danfoss is an accessory designed for the direct connection of seat control valves to steel pipework. The tailpiece enables secure, leak-tight welding to the piping system with a nominal diameter of DN 20, while on the valve side it is connected by means of a G 1" female parallel thread. More information
Out of stock - can be requested
| Connection size | G 1" |
| Connection Type | Internal thread |
| Nominal diameter | DN 20 |
| Pressure | 25 bar |
| Weight | 0.33 kg |
The Danfoss 003H6909 set of weld-on tailpieces is manufactured as a two-piece, straight assembly intended for installation on Danfoss seat valves. The threaded union part is made of brass, while the weld-on end (plain end) is made of steel (St 35 / 1.0308) with an outside diameter of 20 mm. Both ends are supplied without surface treatment. The maximum operating pressure at 20 °C is 25 bar.
The tailpiece is system-specific and is designed exclusively for use with Danfoss valves of the corresponding sizes.
We respond to your product queries as quickly as possible, usually within 24 hours.
Bola.cz
Nenašli jste to, co jste chtěli vědět?