Most searched for brands of measuring and regulation technology
Smart hydrogen sulphide (H2S) detector EVIKON E2639 with a range of 0...2000 ppm. Durable IP65-rated enclosure, 3 relays, RS485 Modbus communication, Wi-Fi module, built-in LED and audible alarm. More information
Out of stock - can be requested
| Detector type | Stationary |
| Equipment | Siren 85dB, LED |
| IP Rating | IP 65 |
| Output signal | ModBus RS485, 3x SPDT relay, 2x Analogue output 4-20mA |
| Power Supply | 14...36 VDC |
| Type of gas | H2S - Hydrogen sulphide |
| Weight | 0.50 kg |
E2639-H2S is a detector designed for monitoring high concentrations of carbon monoxide in the air. The device is equipped with a temperature-compensated sensor that ensures reliable detection and stable measurement, and is housed in a wall-mounted enclosure with IP65 protection. The E2639 features three SPDT relays with a maximum load of 250 VAC 5 A. Two relays are used for so-called two-stage detection. The third relay indicates a sensor fault. Communication with higher-level systems is provided by an RS485 Modbus RTU digital interface, complemented by two 4–20 mA analogue outputs. The version with a Wi-Fi module enables wireless connection of a smartphone or tablet for configuration and calibration via a web interface – with no need to install an app. In addition, the device includes four LEDs and an audible alarm, which immediately alert operators to an exceeded set limit directly at the installation site – without the need to monitor a remote control system.
The E2639-H2S detector is intended for monitoring hydrogen sulphide in environments such as wastewater treatment plants, sewer systems, paper mills, chemical plants, oil and natural gas processing facilities, and other industrial operations where this toxic gas may accumulate. The device helps prevent health risks associated with exposure to hydrogen sulphide and contributes to the safety of both personnel and operations.
Hydrogen sulphide is a colourless gas that can be recognised even at very low concentrations by its characteristic rotten egg smell. At higher concentrations, however, it causes paralysis of the sense of smell, so its presence cannot be reliably detected without a detector. It is formed mainly during the biological decomposition of organic substances containing sulphur, typically in sewers, wastewater treatment plants, agricultural operations, or during the extraction and processing of oil and natural gas. Exposure to hydrogen sulphide can cause irritation of the mucous membranes, nausea, or headaches even at low levels, while high concentrations pose an immediate threat to life.
The E2639 detector combines the advantages of an autonomous safety device and an intelligent communication node. It is designed for seamless integration with fire alarm systems (EPS) and offers a wide range of outputs for comprehensive control:
Compared to the standard version, the E2639-WF has an integrated WiFi module that turns calibration and configuration into a matter of minutes – without tools and without removing the cover. The access point is activated using a magnetic key, and the configuration interface opens in the browser of a phone or tablet, with no need to download any app. The interface is password-protected with separate access levels for end users and integrators, so everyone works only within their own part of the settings.
Factory settings:
Each detector package includes the original manufacturer’s calibration certificate in English, confirming the accuracy and correctness of measurement at the time of leaving the factory.
We respond to your product queries as quickly as possible, usually within 24 hours.
Bola.cz
Nenašli jste to, co jste chtěli vědět?