Evikon E2630-HFC is a detector designed for monitoring the concentration of R134a refrigerant in air. The device uses a semiconductor sensor that provides accurate real-time measurements. Thanks to its reliable performance and easy installation, it is an ideal choice for commercial and industrial applications where refrigerant leak monitoring is essential.

The device is housed in a wall-mounted enclosure with IP65 protection, ensuring resistance to dust and water. The E2630-HFC detector is equipped with a visual and audible alarm that provides timely warning when the R134a concentration rises. In addition, it offers two SPDT relay outputs for easy integration with ventilation control systems or alarms, ensuring a comprehensive safety solution.

Typical applications:

The E2630-HFC detector is intended for monitoring R134a refrigerant leaks in environments such as plant rooms, air conditioning and refrigeration equipment, refrigerant storage areas, or other installations where refrigerant concentration monitoring is required. The device is used for early leak detection, helping to minimise the risks associated with refrigerant leakage and protecting both the environment and the equipment.

R134a:

R134a is a synthetic refrigerant widely used in refrigeration and air conditioning systems. It is a colourless gas with a faint odour and low toxicity. Although it is non-flammable, its leakage may cause deterioration in air quality or contribute to greenhouse gas emissions. Monitoring R134a leaks is essential for maintaining equipment safety and compliance with environmental standards.

Calibration certificate

Every Evikon gas detector package includes a factory-issued calibration certificate. The calibration certificate is in English. Gas concentration measurement is affected by operating temperature and humidity, therefore the detector is calibrated during production with enhanced safety in mind.

Key features:

• Detected substances: R134a refrigerant
• May respond to: Other refrigerants R404a, R410a, R32, R-1234yf, R-1234ze, flammable gases, toluene, xylenes, vapours from cleaning agents, etc.
• Sensor type: Metal oxide semiconductor sensor with diffusion sampling.
• Measuring range: 0...500 ppm with 1 ppm resolution.
• Two-stage detection
• Response time: Less than 120 seconds with signal update every second.
• Alarms: Flashing LED and siren (85 dB).
• Recommended recalibration interval: 6–12 months
• Expected sensor lifetime: > 5 years
• Avoid strong mechanical shocks, vibrations, or electromagnetic interference (EMI). Also avoid exposure to corrosive gases or products containing silicone.

Specifications:

• Power supply: 24 VDC/AC ±20%
• Power consumption: < 2 VA
• Max. load of SPDT relay outputs: 250 VAC / 30 VDC, 5 A max
• Operating conditions: -40...+70 °C, <95% RH, pressure 0.9...1.1 atm
• Enclosure dimensions: H140 × W145 × D55 mm
• Protection class: IP65

This detector is suitable for monitoring R134a refrigerant in various environments, including industrial facilities and storage areas. It offers stable performance with low maintenance requirements, making it a practical solution for long-term use across a wide range of applications.